NOTE: The EGR Block Off Plate Is For Off-Road Use ONLY.

Our plate allows you to pull the EGR tube from the exhaust so that it will draw in fresh air instead of exhaust gas. The plate is then used to cap the exhaust on the header/manifold. Copper RTV recommended for optimum sealing. Exhaust side plate is threaded for use with factory bolt. Optional intake side is not threaded.

With the EGR now drawing in fresh air your intake will stay cleaner and cooler. *Gas mileage will suffer about 1mpg with this mod.

Using this method will keep the PCM happy and you WILL NOT SET AN SES LIGHT or throw any codes!

The intake blockoff plate is also used to block the PCV inlet on a Gen 5 blower when doing a Gen 5 swap.