Rebuilding your Eaton snout require a hydraulic press. Replacing your blower housing needle bearings requires pressing them out with pressurized fluid. Changing the seal on the end does not require any special tools. We do not offer tech support on these parts. We recommend that they be installed by a qualified professional.
Choosing the snout bearing option gets you the 2 bearings in the snout. The case needle bearings are a replacement for the bearings in the back of the case where the rotors slide into.
We now include the EATON brand double seal! Dont be fooled by the cheap single seal that everyone else sells.
We are an authorized EATON rebuilder.
Model: The type of blower you have.
Option 1: What you want it to come with - snout seal, snout bearings, needle bearings.
Option 2: Is only needed if you selected the Option 1 drop down that includes needle bearings.
Model info:
Option 2: All models except Gen 5 and M112
97-03 Grand Prix GTP, 04+ Monte/Impala, 97+ Regal GS, 97+ Bonneville SSEi, 97+ Park Ave s/c
Option 2: Gen 5 m90/m62 or M112
04+ Grand Prix s/c, Ford Lightning, Mustang Cobra
Gen 5 case needle bearing dimensions are ID 17mm OD 27mm and length 22.22mm. These are used on many whipple superchargers.
|